3d Frames, supports and covers for your Keymmodore-64

There are several frames, supports and covers, depending how you want to build your Keymmodore and the interfase of choice. From a single support without having to remove the mainboard, to a full set of covers and frames to put your interfase and Joystick ports, inside the C-64 Case. You can use the original screws if you want.

Hover over the pics to download.

Sketchup Files

In case you want to improve my designs, here you can find the originals SketchUp files (I know, they are a mess…)..

If you improve them please let me know to share it. Also you can design missing frames for Arduino Micro and Teensy 2.0 (I don’t have those boards).

Teensy++2.0
Arduino Leonardo
ProMicro
Arduino Micro

.STL Files (for 3D printing)

For full cover frames, there are two options, according holes in your case. Some cases (mostly «drean commodore» from Argentina) has an extra line of holes in the middle, then the frames are shorter. Check your case before printing.

Print them with «Touching Buildplate» only Support, bridging works fine. 0.4mm nozzle and 0.2mm layer height are recommended.

For Teensy++2.0

Simple Support. You don’t even need to remove your mainboard to install it. Just use a screw of keyboard frame.

Right frame with Joysticks connectors for full covers.

Right Frame without Joysticks for full covers.

For Arduino Micro

Simple Support. You don’t even need to remove your mainboard to install it. Just use two screws of keyboard frame.

Right frame with Joysticks connectors for full covers.

Right Frame without Joysticks for full covers.

For Arduino Leonardo

Simple Support. You don’t even need to remove your mainboard to install it. Just use two screws of keyboard frame.

Right frame with Joysticks connectors for full covers.

Right Frame without Joysticks for full covers.

For Arduino ProMicro

Simple Support. You don’t even need to remove your mainboard to install it. Just use a screw of keyboard frame.

Right frame with Joysticks connectors for full covers

Right Frame without Joysticks for full covers

Common frames and covers for all boards

This pieces work cover the rest of the case holes. For the Cassette and User Port, there are two set, due to differences in cases. Drean is for argentinean «Drean Commodore» and «USA», well….

Hope they fit yours too. Let me know in case you make new or improve these.