3d Frames, Supports And Covers For Your Keymmodore-264
There are several frames, supports and covers, depending how you want to build your Keymmodore and the interfase of choice. From a single support without having to remove the mainboard, to a full set of covers and frames to put your interfase and Joystick ports, inside the C-64 Case. You can use the original screws if you want.
Sketchup Files
In case you want to improve my designs, here you can find the originals SketchUp files (I know, they are a mess…). Click in the pic below
If you improve them please let me know to share it. Also you can design missing frames for Arduino Micro and Teensy 2.0 (I don’t have those boards).
.STL Files
Print them with «Touching Buildplate» only Support, bridging works fine. 0.4mm nozzle and 0.2mm layer height are recommended.
Simple Support. You don’t even need to remove your mainboard to install it. Just use a screw of keyboard frame.
Right frame with Joysticks connectors for full covers.
Right Frame without Joysticks for full covers.
Simple Support. You don’t even need to remove your mainboard to install it. Just use two screws of keyboard frame.
Right frame with Joysticks connectors for full covers.
Right Frame without Joysticks for full covers.
Simple Support. You don’t even need to remove your mainboard to install it. Just use a screw of keyboard frame.
Right frame with Joysticks connectors.
Right Frame without Joysticks.
Common frame for all boards
This piece cover the rest of the case holes.
Let me know in case you make new or improve it.